Indian Scientists Demonstrate 100 Gbps Silicon Chip for Future 6G
Vitorr Classes | Science & Technology Current Affairs | 11 November 2026
Official research announcement: 4 November 2026. Laboratory demonstration, not commercial 6G rollout.
Complete English Article
1. What happened on 4 November 2026?
The Ministry of Science and Technology reported research by the Jawaharlal Nehru Centre for Advanced Scientific Research (JNCASR), an autonomous institute of the Department of Science and Technology. Researchers demonstrated a silicon photonic crystal chip that transmitted data at up to 100 gigabits per second across an engineered barrier. The result is a laboratory demonstration with potential applications in future sixth-generation wireless communication, not the introduction of a working nationwide 6G network.
2. Why is 100 Gbps remarkable?
A rate of 100 gigabits per second corresponds to 12.5 gigabytes per second in ideal arithmetic because eight bits make one byte. A five-gigabyte file could theoretically be transmitted in 0.4 seconds at that sustained payload rate, before accounting for overhead and real-world limitations. The PIB described a high-definition film transfer in under half a second as an illustrative possibility. The demonstration concerns chip-level data transmission, not an end-user phone download speed.
3. What are terahertz waves?
Terahertz electromagnetic radiation lies broadly between microwaves and infrared light. High-frequency bands offer large bandwidth for future communication, but propagation, absorption, component manufacturing and signal routing create engineering challenges. The research measured operation across 310–360 gigahertz, or 0.31–0.36 terahertz.
4. How was the chip designed?
The team patterned triangular holes in a high-resistivity silicon slab to form a photonic crystal resembling a honeycomb lattice. By carefully choosing the hole geometry, the structure creates boundary pathways that guide electromagnetic waves. An engineered barrier was made by changing hole sizes in a short section. This is an example of topological photonics and a phenomenon described as photonic Klein tunnelling.
5. What does passing through a barrier mean?
The barrier is a deliberately engineered change inside the chip, not a wall or building through which wireless signals suddenly travel. The research found that a single barrier caused about 1–2% additional loss, and two successive barriers about 2–3%, under tested conditions. A conventional non-topological waveguide showed much greater disruption for a comparable barrier. This makes the result relevant to robust on-chip routing.
6. Three device designs and measured speeds
Researchers fabricated three devices: a double-barrier waveguide, an omega-shaped path with four sharp bends and a central barrier, and a power splitter containing a barrier in one branch. High-speed data experiments achieved 48 Gbps for the double-barrier device, 60 Gbps for the omega-shaped device and 100 Gbps for the splitter using QAM-32 modulation. These are different test configurations and must not be reported as if every design reached 100 Gbps.
7. What is QAM-32?
Quadrature amplitude modulation encodes digital information by changing the amplitude and phase of a carrier signal. In 32-QAM, 32 possible symbol states can represent five bits per symbol under ideal mapping because 2 to the power 5 equals 32. Achievable data throughput also depends on symbol rate, coding and channel quality.
8. Who conducted the research?
The work was led by Dr Abhishek Kumar, Assistant Professor at JNCASR and head of its Meta Optics Laboratory. Samina Mulla and Sangram Kumar Sadhu were joint first authors. Collaborators came from JNCASR, IISER Kolkata, IIT Bombay, A*STAR Singapore, and the University of Lille and CNRS in France. The study appeared in the journal Advanced Materials.
9. Why could this matter for 6G?
Future high-capacity wireless systems may require compact chips capable of guiding and splitting very-high-frequency signals with limited loss. More robust paths around sharp bends and engineered discontinuities could simplify integrated terahertz components. However, commercial 6G also needs antennas, radio-frequency hardware, networks, standards, energy-efficient systems and reliable real-world propagation.
10. Challenges and limitations
The demonstrated devices are experimental. Results measured on a fabricated chip do not prove that a 100 Gbps wireless connection is available to consumers. Signal attenuation through air, power efficiency, manufacturing scalability, device packaging and integration remain important challenges. The team plans to explore electrically, thermally or mechanically tunable barriers for reconfigurable routing.
11. Importance for India and examinations
For UPSC GS III, connect this research to indigenous scientific capability, semiconductor materials, advanced communications, research institutions and international collaboration. For SSC and Railway, remember JNCASR, Department of Science and Technology, 100 Gbps, terahertz frequencies, photonic crystals, silicon and the Advanced Materials journal. Avoid confusing a laboratory data rate with mobile internet speed.
12. Conclusion
The silicon-chip experiment illustrates how carefully engineered materials can guide terahertz signals with surprisingly low additional loss. It is a promising building block for future communication technologies, but not proof that India has launched 6G services. The research demonstrates the importance of fundamental physics and applied engineering working together.
Complete हिन्दी Article
1. 4 नवंबर 2026 को क्या हुआ?
विज्ञान और प्रौद्योगिकी मंत्रालय ने जवाहरलाल नेहरू उन्नत वैज्ञानिक अनुसंधान केंद्र (JNCASR) के शोध की जानकारी दी। यह संस्थान विज्ञान और प्रौद्योगिकी विभाग के अंतर्गत एक स्वायत्त संस्थान है। शोधकर्ताओं ने सिलिकॉन फोटोनिक क्रिस्टल चिप पर निर्मित अवरोध के पार 100 गीगाबिट प्रति सेकंड तक डेटा संचार का प्रदर्शन किया। यह प्रयोगशाला की उपलब्धि है, देश में व्यावसायिक 6G सेवा शुरू होने की घोषणा नहीं।
2. 100 Gbps की गति का क्या अर्थ है?
100 गीगाबिट प्रति सेकंड की सैद्धांतिक दर 12.5 गीगाबाइट प्रति सेकंड के बराबर होती है क्योंकि एक बाइट में आठ बिट होते हैं। यदि पूरी दर लगातार उपलब्ध रहे तो पाँच गीगाबाइट डेटा भेजने में लगभग 0.4 सेकंड लग सकते हैं। वास्तविक परिस्थितियों में अतिरिक्त डेटा, उपकरणों और नेटवर्क की सीमाएँ प्रभाव डालती हैं। यह चिप-स्तरीय परीक्षण था, मोबाइल फोन पर मिलने वाली वास्तविक डाउनलोड गति नहीं।
3. टेराहर्ट्ज तरंगें क्या हैं?
टेराहर्ट्ज विद्युतचुंबकीय तरंगें सामान्यतः माइक्रोवेव और अवरक्त विकिरण के बीच स्थित होती हैं। इनकी उच्च आवृत्ति व्यापक बैंडविड्थ की संभावना देती है, लेकिन सिग्नल का क्षय, अवशोषण तथा परिपथ में उसका नियंत्रण कठिन होता है। इस शोध में 310 से 360 गीगाहर्ट्ज की आवृत्ति सीमा पर परीक्षण किए गए, जो 0.31 से 0.36 टेराहर्ट्ज के बराबर है।
4. सिलिकॉन चिप कैसे बनाई गई?
शोधकर्ताओं ने उच्च प्रतिरोधकता वाले सिलिकॉन में त्रिकोणीय छिद्रों का विशेष विन्यास तैयार किया। इससे ग्रैफीन जैसी षट्कोणीय संरचना वाला फोटोनिक क्रिस्टल बना। इस संरचना के दो क्षेत्रों की सीमा पर विद्युतचुंबकीय तरंगों को निर्देशित किया जा सकता है। कुछ छिद्रों का आकार बदलकर कृत्रिम अवरोध बनाया गया। यह टोपोलॉजिकल फोटोनिक्स और फोटोनिक क्लाइन टनलिंग से संबंधित प्रयोग है।
5. अवरोध पार करने का वास्तविक अर्थ
यह अवरोध चिप के भीतर बनाया गया ज्यामितीय परिवर्तन है, कोई इमारत या दीवार नहीं। एक अवरोध से लगभग 1–2 प्रतिशत तथा दो लगातार अवरोधों से लगभग 2–3 प्रतिशत अतिरिक्त सिग्नल हानि देखी गई। समान प्रकार के पारंपरिक वेवगाइड में अवरोध का प्रभाव अधिक था। इसलिए यह खोज चिप के भीतर सिग्नल को कम हानि के साथ मोड़ने और आगे भेजने में उपयोगी हो सकती है।
6. तीन उपकरणों के परीक्षण
शोधकर्ताओं ने दो अवरोधों वाला वेवगाइड, चार तीखे मोड़ों वाला ओमेगा आकार का मार्ग तथा दो शाखाओं वाला पावर स्प्लिटर बनाया। इन प्रयोगों में क्रमशः 48 Gbps, 60 Gbps और 100 Gbps तक डेटा संचार दर्ज किया गया। पावर स्प्लिटर में QAM-32 मॉड्यूलेशन का उपयोग हुआ। यह ध्यान रखें कि तीनों उपकरणों में 100 Gbps की गति प्राप्त नहीं हुई थी।
7. QAM-32 क्या है?
क्वाड्रेचर एम्प्लीट्यूड मॉड्यूलेशन एक ऐसी विधि है जिसमें सिग्नल के आयाम और चरण को बदलकर डिजिटल सूचना भेजी जाती है। 32-QAM में 32 संभावित प्रतीक अवस्थाएँ होती हैं, जिनसे आदर्श रूप में प्रत्येक प्रतीक पाँच बिट सूचना दर्शा सकता है क्योंकि 2 की पाँचवीं घात 32 है। वास्तविक डेटा दर प्रतीक दर, कोडिंग और संचार माध्यम पर भी निर्भर करती है।
8. शोध किसने किया?
शोध का नेतृत्व JNCASR के सहायक प्रोफेसर डॉ. अभिषेक कुमार ने किया, जो मेटा ऑप्टिक्स प्रयोगशाला के प्रमुख हैं। समीना मुल्ला और संग्राम कुमार साधु संयुक्त प्रथम लेखक थे। JNCASR, IISER कोलकाता, IIT बॉम्बे, सिंगापुर के A*STAR तथा फ्रांस के विश्वविद्यालय और CNRS से जुड़े वैज्ञानिकों ने सहयोग किया। अध्ययन एडवांस्ड मैटेरियल्स पत्रिका में प्रकाशित हुआ।
9. भविष्य के 6G के लिए महत्व
भविष्य की संचार प्रणालियों को बहुत अधिक आवृत्ति वाले सिग्नलों को चिप के भीतर नियंत्रित करने की आवश्यकता हो सकती है। ऐसे परिपथ जो मोड़ों और अवरोधों के बावजूद कम सिग्नल हानि दिखाएँ, उपयोगी हो सकते हैं। लेकिन व्यावसायिक 6G के लिए एंटीना, नेटवर्क मानक, ऊर्जा दक्षता, उपयुक्त हार्डवेयर और वास्तविक परिस्थितियों में भरोसेमंद संचार भी आवश्यक होगा।
10. सीमाएँ और आगे की चुनौतियाँ
यह एक प्रायोगिक तकनीक है। चिप पर 100 Gbps डेटा भेजना उपभोक्ताओं को 100 Gbps वायरलेस इंटरनेट उपलब्ध होने का प्रमाण नहीं है। वायु में सिग्नल हानि, ऊर्जा खपत, निर्माण की लागत, पैकेजिंग और बड़े पैमाने पर उत्पादन जैसी समस्याओं का समाधान आवश्यक है। शोधकर्ता भविष्य में विद्युत, तापीय या यांत्रिक तरीकों से अवरोधों को नियंत्रित करने की संभावना तलाशना चाहते हैं।
11. प्रतियोगी परीक्षाओं में महत्व
UPSC सामान्य अध्ययन पेपर III में इसे स्वदेशी अनुसंधान, अर्धचालक पदार्थ, उन्नत संचार, वैज्ञानिक संस्थानों और अंतरराष्ट्रीय सहयोग से जोड़कर पढ़ें। SSC तथा रेलवे के लिए JNCASR, विज्ञान और प्रौद्योगिकी विभाग, 100 Gbps, टेराहर्ट्ज आवृत्ति, फोटोनिक क्रिस्टल, सिलिकॉन तथा एडवांस्ड मैटेरियल्स पत्रिका महत्वपूर्ण हैं।
12. निष्कर्ष
यह शोध दर्शाता है कि पदार्थों की सूक्ष्म संरचना को विशेष रूप से तैयार करके उच्च आवृत्ति वाले सिग्नलों को कम अतिरिक्त हानि के साथ नियंत्रित किया जा सकता है। यह भविष्य के संचार उपकरणों के लिए महत्वपूर्ण संभावना है, लेकिन भारत में 6G सेवा शुरू हो जाने का प्रमाण नहीं है।
Practice MCQs / अभ्यास प्रश्न
Question 1 / प्रश्न 1
English: Which institute led the reported silicon photonic chip research?
हिन्दी: इस सिलिकॉन फोटोनिक चिप शोध का नेतृत्व किस संस्थान ने किया?
- JNCASR
- DRDO
- NITI Aayog
- BARC
Answer / उत्तर: A. JNCASR
Detailed Explanation (English)
JNCASR is an autonomous institute under DST.
विस्तृत व्याख्या (हिन्दी)
JNCASR विज्ञान और प्रौद्योगिकी विभाग का स्वायत्त संस्थान है।
Question 2 / प्रश्न 2
English: What was the maximum reported data rate in the splitter test?
हिन्दी: पावर स्प्लिटर परीक्षण में अधिकतम कितनी डेटा दर प्राप्त हुई?
- 10 Gbps
- 48 Gbps
- 60 Gbps
- 100 Gbps
Answer / उत्तर: D. 100 Gbps
Detailed Explanation (English)
The splitter supported 100 Gbps using QAM-32; other designs achieved 48 and 60 Gbps.
विस्तृत व्याख्या (हिन्दी)
QAM-32 के साथ स्प्लिटर में 100 Gbps प्राप्त हुआ; अन्य उपकरणों में 48 और 60 Gbps प्राप्त हुए।
Question 3 / प्रश्न 3
English: What frequency range was measured?
हिन्दी: किस आवृत्ति सीमा में परीक्षण किया गया?
- 3–6 GHz
- 30–60 GHz
- 310–360 GHz
- 3–6 THz
Answer / उत्तर: C. 310–360 GHz
Detailed Explanation (English)
Measurements across 310–360 GHz agreed closely with simulations.
विस्तृत व्याख्या (हिन्दी)
310–360 GHz पर मापन सिमुलेशन के निकट पाया गया।
Question 4 / प्रश्न 4
English: What is the engineered barrier in this experiment?
हिन्दी: इस प्रयोग में कृत्रिम अवरोध क्या था?
- A concrete wall
- A geometric change in triangular holes in the chip
- An ocean cable
- A satellite shield
Answer / उत्तर: B. A geometric change in triangular holes in the chip
Detailed Explanation (English)
The barrier was created by changing hole geometry in a silicon photonic crystal, not by testing transmission through a building wall.
विस्तृत व्याख्या (हिन्दी)
सिलिकॉन फोटोनिक क्रिस्टल में त्रिकोणीय छिद्रों का आकार बदलकर अवरोध बनाया गया था, किसी इमारत की दीवार से नहीं।
Question 5 / प्रश्न 5
English: Which journal published the study?
हिन्दी: अध्ययन किस पत्रिका में प्रकाशित हुआ?
- Nature Astronomy
- The Lancet
- Advanced Materials
- Economic Survey
Answer / उत्तर: C. Advanced Materials
Detailed Explanation (English)
The research appeared in Advanced Materials.
विस्तृत व्याख्या (हिन्दी)
शोध एडवांस्ड मैटेरियल्स पत्रिका में प्रकाशित हुआ।
Official source / आधिकारिक स्रोत
Press Information Bureau, Ministry of Science & Technology, 4 November 2026.
Read the official PIB research announcement
Research DOI: 10.1002/adma.75322
Image attribution: refer to official PIB article; obtain permission or use a licensed illustration before publishing.
History Geography General Science Economy
SSC CGL 2026 Ultimate Chapterwise